{"title":"Pre-Owned \u0026 Clearance","description":"Hi-Fi Centre has a limited selection of pre-owned and demonstration products available. Demo items will come with full factory warranty.  Pre-owned items have been rigorously inspected and unless stated otherwise, will include the factory box, packaging and accessories.","products":[{"product_id":"mcintosh-men-220-room-correction-system","title":"Mcintosh MEN-220 Room Correction System","description":"\u003cp\u003eThe \u003cstrong\u003eMcIntosh\u003c\/strong\u003e MEN-220 \u003cstrong\u003eroom correction system\u003c\/strong\u003e is built within a heavy-gauge steel chassis, engineered to correct acoustic room anomalies in two-channel high-fidelity systems. Operating with balanced XLR and single-ended RCA connections, the architecture maintains an uncoloured signal path between preamplifiers and power amplification. A flat frequency response of 20 Hz to 20,000 Hz alongside 0.002% total harmonic distortion preserves absolute signal neutrality throughout the audio chain.\u003c\/p\u003e\u003ch3\u003eThe Hi-Fi Centre Team Take\u003c\/h3\u003e\u003cp\u003eLiving with the McIntosh MEN-220 resolves complex boundary reflections and standing waves that physical loudspeaker positioning cannot eliminate. Running the RoomPerfect calibration sequence curbs low-frequency room modes, producing taut bass response and correcting phase alignment across the audio spectrum. The integrated voicing profiles permit practical tonal tailoring to compensate for thin recordings or low-volume evening sessions. The result is coherent stereo imaging and soundstage focus that leaves the inherent voicing of the loudspeakers unaltered.\u003c\/p\u003e\u003ch3\u003eKey Acoustic \u0026amp; Design Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoomPerfect Calibration:\u003c\/strong\u003e Analyses acoustic room reflections to correct boundary resonances without altering the natural character of the loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Electronic Crossover:\u003c\/strong\u003e Directs sub-bass frequencies to active subwoofers with selectable filter slopes to relieve primary speakers of low-end distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Voicing Profiles:\u003c\/strong\u003e Provides target frequency curves to compensate for varying recording production qualities and listening preferences.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorised Dealer Coverage:\u003c\/strong\u003e Hi-Fi Centre is an authorised dealer for McIntosh, guaranteeing genuine components, full warranty protection, and factory-trained technical support.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \u0026amp; Model:\u003c\/strong\u003e McIntosh MEN-220\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Stereo room correction system and electronic crossover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20 Hz – 20,000 Hz (+0, -0.5 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Harmonic Distortion:\u003c\/strong\u003e 0.002% (20 Hz – 20,000 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio:\u003c\/strong\u003e 100 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput \u0026amp; Output Impedance:\u003c\/strong\u003e 10 kΩ input (balanced\/unbalanced); 50 Ω output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output Voltage:\u003c\/strong\u003e 4.5 V (preamplifier\/power amplifier), 2.25 V (processor loop)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover Filters:\u003c\/strong\u003e 1st, 2nd, and 4th order Butterworth; 2nd, 4th, and 8th order Linkwitz-Riley\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity \u0026amp; Control:\u003c\/strong\u003e Balanced XLR, single-ended RCA, RS-232, IR remote input, 12 V power triggers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 44.45 cm x 15.24 cm x 45.72 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11.6 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhere should the McIntosh MEN-220 be placed in the signal path?\u003c\/strong\u003e\u003cbr\u003eThe MEN-220 connects between your preamplifier and power amplifier using balanced XLR or single-ended RCA cables. It can also be inserted into an amplifier's tape monitor or processor loop if available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the unit include the measurement microphone and accessories?\u003c\/strong\u003e\u003cbr\u003eYes. The MEN-220 is supplied with a calibrated measurement microphone, a professional-grade boom stand, and an extended XLR cable to allow thorough acoustic mapping of the listening environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does RoomPerfect calibration differ from conventional equalisation?\u003c\/strong\u003e\u003cbr\u003eUnlike standard EQ that alters tonal balance across the board, RoomPerfect measures direct sound alongside room boundary reflections across multiple positions. It corrects phase anomalies and standing waves while leaving the native sonic signature of your loudspeakers intact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the MEN-220 be used to integrate active subwoofers?\u003c\/strong\u003e\u003cbr\u003eYes. The unit incorporates a sophisticated two-way electronic crossover with selectable Butterworth and Linkwitz-Riley filter slopes, allowing precise frequency handover between primary loudspeakers and subwoofers.\u003c\/p\u003e","brand":"Mcintosh","offers":[{"title":"Default Title","offer_id":533646737413,"sku":"MEN-220","price":10700.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/McintoshMEN220.jpg?v=1698423353"},{"product_id":"mcintosh-mt-2-turntable","title":"Mcintosh MT-2 Turntable","description":"\u003cp\u003eThe \u003cstrong\u003eMcIntosh\u003c\/strong\u003e MT-2 \u003cstrong\u003eturntable\u003c\/strong\u003e is a precision belt-drive playback system engineered with a multi-layered, resonance-optimised compressed wood and acrylic chassis interface designed for uncoloured vinyl reproduction. A decoupled DC motor drives a dual-layer inertia assembly, coupling a CNC-machined aluminium sub-platter with a high-density polyoxymethylene outer platter to maintain rotational consistency. This rigid acoustic foundation ensures microscopic groove modulations are transferred cleanly to the factory-aligned high-output moving-coil cartridge without mechanical interference.\u003c\/p\u003e\u003ch3\u003eThe Hi-Fi Centre Team Take\u003c\/h3\u003e\u003cp\u003eOperating the McIntosh MT-2 Turntable introduces an exacting physical ritual to vinyl playback, anchored by the subtle ambient glow of the signature green illumination shining across the plinth. The decoupled drive motor ensures a background free of mechanical rumble, allowing acoustic decay and spatial cues to emerge naturally during low-volume listening sessions. Its factory-fitted high-output moving-coil cartridge tracks complex grooves with neutral precision, generating sufficient output to feed standard moving-magnet phonostages directly. The heavy-set, damped architecture delivers composed, fatigue-free musicality across both standard and audiophile pressings.\u003c\/p\u003e\u003ch3\u003eKey Acoustic \u0026amp; Design Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDural-Aluminium Tonearm:\u003c\/strong\u003e Internally damped straight arm tube riding on low-friction sapphire and ceramic gimbal bearings eliminates tracking distortion and acoustic resonance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Layer Inertia Platter:\u003c\/strong\u003e Dynamically balanced polyoxymethylene outer platter seated on a CNC-machined aluminium sub-platter acts as a high-mass flywheel to suppress rotational variance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecoupled DC Drive:\u003c\/strong\u003e Isolated motor assembly driven by an external speed-stabilised regulator prevents mechanical vibration and electrical hum from reaching the stylus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized Dealer:\u003c\/strong\u003e Hi-Fi Centre is an Authorized Dealer for McIntosh, ensuring genuine factory warranty coverage, certified care, and dedicated long-term support.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \u0026amp; Model:\u003c\/strong\u003e McIntosh MT-2 Turntable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Type:\u003c\/strong\u003e Belt drive with decoupled DC motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Speeds:\u003c\/strong\u003e 33-1\/3 rpm, 45 rpm (electronic control)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge Type:\u003c\/strong\u003e High-output moving coil (moving-magnet input compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm Architecture:\u003c\/strong\u003e Dural-aluminium arm tube with sapphire and ceramic gimbal bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter System:\u003c\/strong\u003e Dynamically balanced POM outer platter with CNC-machined aluminium inner platter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinth Construction:\u003c\/strong\u003e Resonance-optimised compressed wood core with black and clear acrylic plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 45.2 cm x 12.7 cm (15.2 cm with dust cover) x 43.2 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.2 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the McIntosh MT-2 require a dedicated moving-coil (MC) phono stage?\u003c\/strong\u003e\u003cbr\u003eNo. The MT-2 is equipped with a high-output moving-coil cartridge that produces sufficient voltage to connect directly to standard moving-magnet (MM) phono preamplifier inputs without requiring an external step-up transformer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a dust cover included with the turntable?\u003c\/strong\u003e\u003cbr\u003eYes, the MT-2 includes a precision-contoured, clear acrylic dust cover that shields the tonearm, platter, and bearing mechanism from airborne particulate accumulation when not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow are playback speeds adjusted between 33-1\/3 and 45 rpm?\u003c\/strong\u003e\u003cbr\u003eSpeed selection is controlled electronically via the top-mounted rotary control, eliminating the need to manually reposition the drive belt across differing pulley tiers.\u003c\/p\u003e","brand":"Mcintosh","offers":[{"title":"Default Title","offer_id":8498827132981,"sku":"MT-2","price":6495.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/McintoshMT2.jpg?v=1698259644"},{"product_id":"mcintosh-mpc-500-ac-line-filter","title":"Mcintosh MPC-500 AC Line Filter","description":"\u003cp\u003eThe \u003cstrong\u003eMcIntosh\u003c\/strong\u003e MPC-500 \u003cstrong\u003eAC line filter\u003c\/strong\u003e and power controller provides continuous mains conditioning and surge suppression for high-end audio and home cinema systems. Housed in a robust steel chassis with an illuminated black glass faceplate and aluminium end caps, it shields sensitive circuitry from mains anomalies and high-frequency interference. The unit delivers pure, uncorrupted electricity to ensure your system components operate with an exceptionally low noise floor and complete dynamic stability.\u003c\/p\u003e\u003ch3\u003eThe Hi-Fi Centre Team Take\u003c\/h3\u003e\u003cp\u003eLiving with the McIntosh MPC-500 brings complete peace of mind to any dedicated listening environment, particularly in residential areas subject to fluctuating mains voltage and grid noise. Watching the front-panel display monitor incoming voltage and real-time current draw transforms electrical management into an informative, tangible element of your daily routine. It establishes an utterly silent electrical backdrop, allowing delicate acoustic decays, subtle textures, and spatial cues to emerge effortlessly during critical listening.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCascaded Surge Suppression:\u003c\/strong\u003e Thermally protected metal-oxide varistors and gas discharge tubes divert high-voltage spikes to protect connected electronics from mains-borne damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectromagnetic Noise Filtering:\u003c\/strong\u003e Integrated AC filtration circuitry eliminates mains-borne electromagnetic interference and high-frequency grunge to drop the baseline noise floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal-Time Diagnostic Metering:\u003c\/strong\u003e Front-panel digital readout provides immediate operational metrics for incoming voltage, active current draw, and total power consumption.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized Dealer Support:\u003c\/strong\u003e Hi-Fi Centre is an Authorized Dealer, providing full manufacturer warranty coverage, certified authenticity, and expert technical guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \u0026amp; Model:\u003c\/strong\u003e McIntosh MPC-500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e AC Line Filter and Power Controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Line-to-neutral thermally protected metal-oxide varistors (TPMOV)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary Defence:\u003c\/strong\u003e Dedicated gas discharge tubes (GDT) and transient voltage suppressors (TVS) for coaxial and Ethernet lines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Safeguards:\u003c\/strong\u003e Automatic high- and low-voltage disconnect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Display:\u003c\/strong\u003e Digital readout for voltage, current draw, and total apparent power consumption\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis Construction:\u003c\/strong\u003e Steel housing with signature black glass faceplate and aluminium end caps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 44.45 cm x 14.9 cm x 43.18 cm (17.5 in x 5.875 in x 17 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.5 kg (32 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow does the McIntosh MPC-500 safeguard connected hi-fi equipment?\u003c\/strong\u003e\u003cbr\u003eThe MPC-500 employs thermally protected metal-oxide varistors (TPMOV) alongside gas discharge tubes and transient voltage suppressors to neutralise mains spikes. It actively monitors incoming line voltage, automatically disconnecting power to rear receptacles during severe over-voltage or under-voltage events to prevent circuit damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill connecting a power amplifier to the MPC-500 restrict dynamic headroom?\u003c\/strong\u003e\u003cbr\u003eNo. The MPC-500 is engineered with heavy-duty internal wiring and high-current filtration circuitry designed to maintain instantaneous current delivery, ensuring large power amplifiers retain their full dynamic range and transient response without choking the supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the MPC-500 protect data and signal lines in addition to mains power?\u003c\/strong\u003e\u003cbr\u003eYes. In addition to AC mains filtration and surge suppression, the unit incorporates dedicated protection modules for Ethernet and coaxial lines, defending network audio streamers and source electronics from secondary electrical transients.\u003c\/p\u003e","brand":"Mcintosh","offers":[{"title":"Default Title","offer_id":31578006126645,"sku":"MPC-500","price":5000.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/MPC500.jpg?v=1698258539"},{"product_id":"marantz-cinema-60-av-receiver","title":"Marantz Cinema 60 AV Receiver","description":"\u003cp\u003eThe Marantz Cinema 60 AV Receiver delivers 7.2 channels of discrete Class A\/B amplification built around proprietary HDAM circuitry to drive an immersive modern home theatre. Engineered with 100 watts of power per channel into 8 ohms, this unit combines traditional analog warmth with advanced digital signal processing. The front architecture features a textured finish, an aluminum center accent, and the signature Marantz porthole display showing key input and volume metrics at a glance.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eImmersive Multi-Dimensional Audio:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eNative decoding for Dolby Atmos and DTS:X creates a three-dimensional soundscape across your listening space. By distributing sound effects above and around the listening position, movies and concert recordings gain realistic height and directional precision. Integrated Audyssey MultEQ XT calibration measures the acoustic characteristics of your room and automatically adjusts speaker output for balanced frequency response.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eAdvanced Video and High-Resolution Streaming:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eDedicated 8K HDMI inputs support advanced video pass-through alongside 4K gaming at 120Hz, variable refresh rate, and auto low latency mode for smooth visual playback. Built-in HEOS technology enables seamless wireless streaming across compatible multi-room zones, giving you direct access to high-resolution music platforms, Apple AirPlay 2, and Bluetooth playback.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eAuthorized Dealer:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eWe are an authorized dealer for Marantz. Purchasing from a trusted brand partner gives you direct access to expert technical guidance and includes the full manufacturer's warranty for total peace of mind on your investment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7.2-Channel Discrete Amplification:\u003c\/strong\u003e Supplies clean, continuous power to drive a wide range of floorstanding and bookshelf speakers with musical clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDolby Atmos and DTS:X Processing:\u003c\/strong\u003e Places sound effects precisely in three-dimensional space for lifelike cinema reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8K HDMI Connectivity:\u003c\/strong\u003e Transmits ultra-high-definition video signals and smooth high-frame-rate gaming without signal degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudyssey MultEQ XT Room Correction:\u003c\/strong\u003e Tailors sound output to match the unique dimensions and acoustic properties of your room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHEOS Multi-Room Streaming:\u003c\/strong\u003e Wirelessly plays high-resolution music across multiple zones through an intuitive application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Phono Input:\u003c\/strong\u003e Connects directly to moving magnet turntables for pure vinyl playback without external preamplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Subwoofer Outputs:\u003c\/strong\u003e Distributes low-frequency bass evenly across your seating area to eliminate acoustic dead zones.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Powered Channels:\u003c\/strong\u003e 7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Output (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive):\u003c\/strong\u003e 100 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Output (6 ohm, 1 kHz, 0.7% 2ch Drive):\u003c\/strong\u003e 140 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier Topology:\u003c\/strong\u003e Class A\/B with Hyper Dynamic Amplifier Modules (HDAM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurround Sound Processing:\u003c\/strong\u003e Dolby Atmos, Dolby Surround, DTS:X, DTS Neural:X\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI Inputs \/ Outputs:\u003c\/strong\u003e 6 \/ 2 (3 inputs supporting 8K\/60Hz and 4K\/120Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDCP Support:\u003c\/strong\u003e HDCP 2.3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Pass-Through \/ HDR:\u003c\/strong\u003e HDR10+, Dynamic HDR, HLG, Dolby Vision\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Return Channel:\u003c\/strong\u003e eARC \/ ARC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog Inputs \/ Outputs:\u003c\/strong\u003e 4 Composite \/ Stereo RCA, 1 Phono (MM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Inputs:\u003c\/strong\u003e 2 Optical, 2 Coaxial, 1 USB Type-A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Out Channels:\u003c\/strong\u003e 7.2 Multichannel Preamp Outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubwoofer Outputs:\u003c\/strong\u003e 2 Independent Outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoom Calibration:\u003c\/strong\u003e Audyssey MultEQ XT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Connectivity:\u003c\/strong\u003e Wi-Fi, Bluetooth, Apple AirPlay 2, HEOS Built-in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 650 W (Standby: 0.2 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x D x H):\u003c\/strong\u003e 442 x 354 x 165 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.9 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan the Marantz Cinema 60 run a 5.1.2 Dolby Atmos configuration?\u003c\/strong\u003e\u003cbr\u003eYes. With 7 discrete internal amplifier channels, the receiver can directly power a 5.1.2 immersive audio setup, consisting of five surround speakers, a subwoofer, and two dedicated height or in-ceiling channels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Cinema 60 support next-generation gaming consoles?\u003c\/strong\u003e\u003cbr\u003eYes. The receiver includes three dedicated HDMI 2.1 inputs supporting 4K at 120Hz and 8K at 60Hz, alongside Variable Refresh Rate (VRR), Auto Low Latency Mode (ALLM), and Quick Frame Transport (QFT) to eliminate lag and frame tearing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I connect external power amplifiers to the Cinema 60?\u003c\/strong\u003e\u003cbr\u003eYes. The Cinema 60 is equipped with full 7.2-channel pre-outs, allowing you to bypass the internal amplifiers and connect dedicated outboard power amplification if your system expands in the future.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I connect a turntable without an external preamp?\u003c\/strong\u003e\u003cbr\u003eYes. The receiver features an integrated moving magnet (MM) phono stage, allowing you to connect a turntable directly to the dedicated phono input.\u003c\/p\u003e","brand":"Marantz","offers":[{"title":"Default Title","offer_id":41908845543477,"sku":"Cinema 60","price":1795.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/MarantzCinema60.jpg?v=1693095237"},{"product_id":"mcintosh-stereo-receiver","title":"McIntosh MAC-7200 Stereo Receiver","description":"\u003cp\u003eThe McIntosh MAC-7200 Stereo Receiver serves as a high-output stereo control centre engineered for audio enthusiasts requiring reference performance across vinyl, broadcast radio, and digital sources. Built to rival dedicated integrated amplifiers, this stereo receiver combines 200 Watts per channel with an integrated AM\/FM tuner and high-resolution digital processing. Proprietary Autoformer architecture ensures uniform power delivery to any connected loudspeaker pair, regardless of electrical impedance.\u003c\/p\u003e\u003ch3\u003eThe Hi-Fi Centre Team Take\u003c\/h3\u003e\u003cp\u003eThe McIntosh MAC-7200 Stereo Receiver commands any domestic listening space with authoritative, fatigue-free control and silent operational backgrounds. The tactile weighted dials and backlit blue watt meters ground your daily listening sessions in mechanical precision, whether decoding high-res stream feeds or tuning into local analogue FM broadcasts at dusk. It offers a singular, self-contained foundation that easily runs challenging floorstanding speakers with expansive dynamic reserve and clarity from dawn until late at night.\u003c\/p\u003e\u003ch3\u003eKey Acoustic \u0026amp; Design Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutoformer Output Delivery:\u003c\/strong\u003e Channels 200 continuous Watts into 2, 4, or 8 Ohm loads for consistent dynamic stability across any loudspeaker design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular DA1 Digital Architecture:\u003c\/strong\u003e Decodes native high-resolution digital audio up to DSD256 and 32-bit\/384kHz PCM through an isolated quad-balanced converter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Guard Driver Protection:\u003c\/strong\u003e Real-time optical waveform comparison prevents harsh amplifier clipping to shield delicate loudspeaker voice coils.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized Dealer Assurance:\u003c\/strong\u003e Hi-Fi Centre provides verified manufacturer warranty coverage, certified authenticity, and long-term technical support as an authorized dealer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Output:\u003c\/strong\u003e 200 Watts per channel into 2, 4, or 8 Ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Harmonic Distortion:\u003c\/strong\u003e 0.005% maximum (20Hz–20,000Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Headroom:\u003c\/strong\u003e 2.0 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20Hz–20,000Hz (+0, -0.5dB); 10Hz–100,000Hz (+0, -3dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue Inputs:\u003c\/strong\u003e 1 Balanced XLR pair, 5 Unbalanced RCA pairs, 1 Moving Magnet phono, 1 Moving Coil phono\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Inputs:\u003c\/strong\u003e 2 Optical, 2 Coaxial, 1 USB Type-B, 1 proprietary MCT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone Output:\u003c\/strong\u003e 6.35 mm High Drive with Headphone Crossfeed Director (HXD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuner Band Support:\u003c\/strong\u003e AM\/FM with RDS text display and signal multipath metering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 44.5 cm x 19.4 cm x 47.6 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 34.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan the digital audio module in the MAC7200 be upgraded?\u003c\/strong\u003e\u003cbr\u003e\nYes. The factory-fitted DA1 Digital Audio Module is modular and can be upgraded to the McIntosh DA2 module by an authorised service centre, adding HDMI (ARC) connectivity and expanded high-resolution playback capabilities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I connect a turntable directly without an external phono stage?\u003c\/strong\u003e\u003cbr\u003e\nYes. The MAC7200 incorporates two discrete, audiophile-grade phono preamplifiers—one dedicated to Moving Magnet (MM) cartridges and one for Moving Coil (MC) cartridges with adjustable electrical impedance loading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the operational advantage of the McIntosh Autoformer?\u003c\/strong\u003e\u003cbr\u003e\nUnlike conventional direct-coupled amplifier stages, McIntosh Autoformers provide dedicated taps for 2, 4, and 8 Ohm speaker loads. This ensures consistent 200-Watt power transfer, optimal thermal management, and complete stability across any loudspeaker impedance profile.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mcintosh","offers":[{"title":"Default Title","offer_id":42097670094901,"sku":"MAC-7200","price":13500.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/McintoshMAC7200.jpg?v=1698425722"},{"product_id":"linn-selekt-lp12-w-trampolin-lingo-kore-arko-kendo-copy","title":"Linn Selekt LP12 w\/ Trampolin, Lingo, Kore, Arko, Kendo (Demo)","description":"\u003cp\u003eThe \u003cstrong\u003eLinn\u003c\/strong\u003e Selekt LP12 w\/ Trampolin, Lingo, Kore, Arko, Kendo is a precision suspended \u003cstrong\u003ebelt-drive turntable\u003c\/strong\u003e engineered with an isolated sub-chassis architecture to deliver mechanical decoupling and accurate vinyl playback for discerning analogue listeners. Finished in black, this preowned package pairs precision-machined aluminium sub-assemblies with dedicated external power regulation to maintain low background noise and pitch stability across both 33⅓ and 45 rpm recordings.\u003c\/p\u003e\u003ch3\u003eThe Hi-Fi Centre Team Take\u003c\/h3\u003e\u003cp\u003eLiving with the Linn Selekt LP12 means experiencing an exceptionally quiet background that lets subtle acoustic textures and natural dynamic shifts emerge effortlessly. The suspended mechanical architecture shields the delicate stylus interface from domestic footfall and room resonance, making it an unfussy centrepiece in practical home environments. Whether spinning intimate acoustic pressings or complex orchestral works, the deck conveys continuous rhythmic drive and neutral tonal poise. It transforms regular record playback into an immersive, deeply engaging daily ritual.\u003c\/p\u003e\u003ch3\u003eKey Acoustic \u0026amp; Design Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArko Gimballed Tonearm:\u003c\/strong\u003e Machined 7075-grade aluminium construction tracks record grooves accurately without unwanted structural resonance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKendo MC Cartridge:\u003c\/strong\u003e Solid boron cantilever and fine-line diamond stylus extract intricate musical textures with uncoloured tonal balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKore Sub-Chassis:\u003c\/strong\u003e Bonded multi-layer aluminium platform maintains absolute mechanical rigidity between the platter bearing and tonearm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized Dealer Support:\u003c\/strong\u003e Hi-Fi Centre is an Authorized Dealer, ensuring verified component authenticity, warranty coverage, and expert product guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Linn\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Selekt LP12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurntable Type:\u003c\/strong\u003e Suspended belt-drive turntable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinth Finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 12V synchronous AC motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33⅓ rpm, 45 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Linn Lingo external motor control unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing:\u003c\/strong\u003e Linn Karousel single-point bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-Chassis:\u003c\/strong\u003e Linn Kore bonded aluminium sub-chassis and armboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaseboard:\u003c\/strong\u003e Linn Trampolin suspended aluminium base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm:\u003c\/strong\u003e Linn Arko 7075-grade aluminium gimballed tonearm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e Linn Kendo moving coil (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus \u0026amp; Cantilever:\u003c\/strong\u003e Super Fine Line diamond with solid boron cantilever\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 445 mm x 140 mm x 356 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan this Linn Selekt LP12 specification be upgraded in the future?\u003c\/strong\u003e\u003cbr\u003eYes. The modular architecture of the Sondek LP12 platform ensures complete upgradeability, enabling future component enhancements—such as power supply or sub-chassis upgrades—without replacing the entire turntable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the condition of this demonstration unit?\u003c\/strong\u003e\u003cbr\u003eThis preowned demo deck has been rigorously inspected, set up, and verified by our Linn-trained technicians to ensure optimal mechanical performance, bearing precision, and aesthetic integrity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes switching between 33⅓ and 45 rpm require moving the belt manually?\u003c\/strong\u003e\u003cbr\u003eNo. The Linn Lingo external power supply features precision electronic speed regulation, allowing you to alternate between 33⅓ rpm and 45 rpm directly from the top-plate switch.\u003c\/p\u003e","brand":"Linn","offers":[{"title":"Black","offer_id":44455065485365,"sku":"Selekt LP12-Black","price":15995.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/SelektLP12.jpg?v=1698249922"},{"product_id":"noble-fokus-prestige-wireless-earphones","title":"Noble FoKus Prestige Wireless Noise Cancelling Earphones","description":"\u003cp\u003eThe \u003cstrong\u003eNoble\u003c\/strong\u003e FoKus Prestige Wireless Noise Cancelling Earphones are three-driver hybrid \u003cstrong\u003ewireless in-ear earphones\u003c\/strong\u003e engineered for discerning listeners demanding accurate acoustic fidelity on the move. Driven by a dedicated 8.2mm dynamic woofer paired with dual balanced armature units, the system achieves linear bass extension and clean high-frequency dispersion across a 20 Hz to 20,000 Hz spectrum. Ergonomically contoured natural timber housings seat firmly within the ear canal, providing effective passive attenuation alongside Qualcomm noise-reduction processing.\u003c\/p\u003e\u003ch3\u003eThe Hi-Fi Centre Team Take\u003c\/h3\u003e\u003cp\u003eLiving with the FoKus Prestige reveals how much acoustic resolution can be extracted from a wireless platform when mechanical resonance is controlled. The dense, solid wood enclosures eliminate the hollow internal reflections typical of standard plastic shells, lending acoustic instruments and vocals authentic weight during daily travel or focused desk sessions. Combined with a ten-hour single-charge endurance, they deliver a quiet, non-fatiguing listening environment that holds composure across crowded public spaces.\u003c\/p\u003e\u003ch3\u003eKey Acoustic \u0026amp; Design Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Three-Driver Array:\u003c\/strong\u003e An 8.2mm dynamic driver combined with twin balanced armatures produces controlled sub-bass impact and articulate treble separation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Wood Construction:\u003c\/strong\u003e Precision-machined natural timber enclosures suppress mechanical vibrations to preserve tonal neutrality and prevent listener fatigue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQualcomm Mirroring Architecture:\u003c\/strong\u003e TrueWireless Mirroring and cVc microphone processing provide robust RF link stability and clear speech isolation during phone calls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized Dealer Support:\u003c\/strong\u003e Hi-Fi Centre is an authorized dealer for Noble, providing authentic products, direct manufacturer warranty protection, and specialist audio support.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Model:\u003c\/strong\u003e Noble FoKus Prestige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarphone Type:\u003c\/strong\u003e True wireless in-ear monitors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver Configuration:\u003c\/strong\u003e 1 x 8.2mm custom dynamic driver, 2 x balanced armature drivers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20 Hz – 20,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Precision-machined solid wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Connectivity:\u003c\/strong\u003e Bluetooth with Qualcomm TrueWireless Mirroring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrophone System:\u003c\/strong\u003e Qualcomm cVc noise-cancelling technology\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Runtime:\u003c\/strong\u003e Up to 10 hours continuous playback per charge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging Case:\u003c\/strong\u003e 500 mAh wooden case; 15-minute quick charge provides up to 70 minutes of playback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo the Noble FoKus Prestige feature Active Noise Cancelling (ANC)?\u003c\/strong\u003e\u003cbr\u003eThe FoKus Prestige rely on high-density ergonomic wooden housings for superior passive acoustic isolation rather than active circuitry, alongside Qualcomm cVc processing for clean ambient noise suppression on phone calls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich Bluetooth codecs are supported?\u003c\/strong\u003e\u003cbr\u003eThey support Qualcomm aptX Adaptive, standard aptX, AAC, and SBC, ensuring stable, high-resolution wireless streaming with compatible smartphones and digital audio players.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs there a dedicated smartphone control application?\u003c\/strong\u003e\u003cbr\u003eYes, the free Noble FoKus app (iOS\/Android) features a 10-band equaliser and an automated personal hearing test to tailor the frequency response to your ears.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan either earpiece be used independently?\u003c\/strong\u003e\u003cbr\u003eYes, Qualcomm TrueWireless Mirroring allows seamless master-slave switching so either individual earbud can be operated independently for mono listening and calls.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Noble","offers":[{"title":"Black","offer_id":44521878847541,"sku":"FoKus Prestige-Black","price":619.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/Fokus_Black_4cbd62d8-0b4b-4dfb-a922-719815482129.jpg?v=1748567681"},{"product_id":"noble-apollo-wireless-headphones","title":"Noble Fokus Apollo Wireless Noise Cancelling Headphones","description":"\u003cp\u003eThe \u003cstrong\u003eNoble\u003c\/strong\u003e Fokus Apollo \u003cstrong\u003ewireless noise cancelling headphones\u003c\/strong\u003e integrate Bluetooth 5.3 connectivity with a dual-driver hybrid architecture designed for audiophiles requiring uncompromising mobile fidelity. By pairing a 40mm dynamic driver with a 14.5mm planar magnetic transducer in each ear cup, the on\/over-ear system balances high-resolution audio decoding with accurate frequency separation. Pristine preowned construction and support for LDAC and aptX HD codecs ensure uncompressed wireless streaming across everyday environments.\u003c\/p\u003e\u003ch3\u003eThe Hi-Fi Centre Team Take\u003c\/h3\u003e\u003cp\u003eLiving with the Noble Fokus Apollo reveals an exceptional tonal balance that transitions effortlessly from desktop listening sessions to high-traffic travel. The planar magnetic drivers render delicate acoustic textures and vocal nuances with crystalline precision, while the dedicated dynamic drivers supply controlled, rhythmic low-end weight. Between the 80-hour battery reserve and the pressure-relieving Alcantara headband, these headphones provide quiet, fatigue-free immersion for entire working days.\u003c\/p\u003e\u003ch3\u003eKey Acoustic \u0026amp; Design Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Dual-Driver Architecture:\u003c\/strong\u003e Allocates low frequencies to a 40mm dynamic driver and detailed treble to a 14.5mm planar magnetic unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Noise Suppression:\u003c\/strong\u003e Utilises three microphones per ear cup to attenuate ambient background interference by up to 35 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Playback Endurance:\u003c\/strong\u003e Provides up to 80 hours of continuous wireless playback with active noise cancellation switched off, or 60 hours with it engaged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized Dealer Assurance:\u003c\/strong\u003e Guarantees verified authentic preowned performance backed by manufacturer warranty support and expert guidance from Hi-Fi Centre.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Model:\u003c\/strong\u003e Noble Audio Fokus Apollo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone Type:\u003c\/strong\u003e Wireless on\/over-ear, closed-back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransducer Complement:\u003c\/strong\u003e 1 x 40mm dynamic driver, 1 x 14.5mm planar magnetic driver (per channel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Noise Cancellation:\u003c\/strong\u003e Hybrid ANC (up to 35 dB reduction) with ambient transparency mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Version:\u003c\/strong\u003e 5.3 via Qualcomm QCC3084 chipset (multipoint pairing enabled)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Codecs:\u003c\/strong\u003e LDAC, aptX HD, aptX, AAC, SBC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Runtime:\u003c\/strong\u003e Up to 80 hours (ANC disabled), up to 60 hours (ANC enabled)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrophone:\u003c\/strong\u003e Integrated call microphones plus detachable boom microphone with hardware mute switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame \u0026amp; Ear Cushions:\u003c\/strong\u003e Anodised aluminium frame, memory foam ear pads, Alcantara headband lining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Accessories:\u003c\/strong\u003e 3.5mm audio cable, 6.35mm adapter, 4.4mm balanced adapter, airline adapter, travel storage case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Preowned\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does the hybrid driver configuration operate?\u003c\/strong\u003e The FoKus Apollo pairs a 40mm dynamic driver for authoritative low-end impact with a 14.5mm planar magnetic transducer engineered to deliver ultra-low distortion and rapid transient precision across the midrange and treble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan the headphones be used in a wired mode?\u003c\/strong\u003e Yes. In addition to wireless operation, the FoKus Apollo supports wired listening using the included 3.5mm audio cable, complete with 4.4mm balanced, 6.35mm, and airline adapters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich high-resolution Bluetooth codecs are supported?\u003c\/strong\u003e Powered by Qualcomm's QCC3084 chipset, the headphones support LDAC, aptX HD, aptX, AAC, and standard SBC codecs for high-resolution wireless streaming from compatible devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the boom microphone removable?\u003c\/strong\u003e Yes. While the ear cups feature integrated beamforming microphones for everyday calls and ANC monitoring, a detachable boom microphone with a hardware mute switch is provided for enhanced vocal clarity during voice conferences or gaming.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Noble","offers":[{"title":"Default Title","offer_id":44521909190709,"sku":"Apollo","price":599.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/Apollo1.jpg?v=1748568484"},{"product_id":"rega-ear-headphone-amplifier","title":"Rega Ear Headphone Amplifier","description":"\u003cp\u003eThe \u003cstrong\u003eRega\u003c\/strong\u003e Ear is a dedicated analogue \u003cstrong\u003eheadphone amplifier\u003c\/strong\u003e engineered to deliver clean, uncoloured drive for critical desktop listening and private hi-fi sessions. Utilizing a low-noise surface-mount circuit topology derived from classic British amplifier architecture, this preowned unit provides robust output power across impedances ranging from 32 to 600 ohms. Its direct signal routing maintains absolute signal integrity between your primary line source and reference monitoring headphones.\u003c\/p\u003e\u003ch3\u003eThe Hi-Fi Centre Team Take\u003c\/h3\u003e\u003cp\u003eThe Rega Ear excels at delivering an articulate, quiet background that lets low-level details emerge cleanly during quiet late-night listening. The physical inclusion of a front-panel mute button and tactile volume pot makes daily desktop operation completely straightforward when switching between listening tasks. Its compact footprint fits effortlessly alongside existing source equipment without crowding your listening space. It delivers an honest, rhythmic sound signature that remains composed even when driving demanding high-impedance dynamic drivers.\u003c\/p\u003e\u003ch3\u003eKey Acoustic \u0026amp; Design Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface-Mount PCB:\u003c\/strong\u003e Shortens the analogue signal path to suppress background noise and preserve delicate musical transients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtruded Aluminium Enclosure:\u003c\/strong\u003e Provides structural damping and isolates internal audio circuitry from external radio-frequency interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoop-Through Connectivity:\u003c\/strong\u003e Integrates into an existing audio system by passing line-level signals without monopolising tape or preamp outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized Dealer Assurance:\u003c\/strong\u003e Guaranteed authentic hardware inspected by Hi-Fi Centre, backed by official dealer support and complete customer care.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \u0026amp; Model:\u003c\/strong\u003e Rega Ear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e Analogue Headphone Amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Preowned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Power (32 Ω):\u003c\/strong\u003e 685 mW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Power (50 Ω):\u003c\/strong\u003e 530 mW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Power (100 Ω):\u003c\/strong\u003e 320 mW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Power (600 Ω):\u003c\/strong\u003e 60 mW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported Headphone Impedance:\u003c\/strong\u003e 32 Ω – 600 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 20 kΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 28 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 12 Hz – 37 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Harmonic Distortion (THD):\u003c\/strong\u003e 0.003% (typical)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio:\u003c\/strong\u003e -100 dB (22 Hz – 22 kHz, ref. max output)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 x Stereo RCA Line-In\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 x 6.35 mm Headphone Jack, 1 x Stereo RCA Loop-Through\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x D x H):\u003c\/strong\u003e 178 mm x 155 mm x 45 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e External 24 V AC (225 mA)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan the Rega Ear drive high-impedance headphones?\u003c\/strong\u003e\u003cbr\u003eYes, the Rega Ear is engineered to drive headphones with impedances ranging from 32 Ω up to 600 Ω, ensuring stable current delivery and ample headroom for demanding audiophile designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does the loop-through connection function?\u003c\/strong\u003e\u003cbr\u003eThe stereo RCA loop-through passes incoming line-level signals back out to an integrated amplifier, preamplifier, or active speakers, allowing the unit to integrate into your setup without occupying an extra tape or aux output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the Rega Ear contain an integrated DAC?\u003c\/strong\u003e\u003cbr\u003eNo, the Rega Ear is a dedicated, pure analogue headphone amplifier. Digital sources require a separate external digital-to-analogue converter to supply a standard line-level RCA input.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rega","offers":[{"title":"Default Title","offer_id":44738037678133,"sku":null,"price":299.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/RegaEar.jpg?v=1760463430"},{"product_id":"clearaudio-compass-turntable","title":"Clearaudio Compass Turntable","description":"\u003cp\u003eThe \u003cstrong\u003eClearaudio\u003c\/strong\u003e Compass \u003cstrong\u003eturntable\u003c\/strong\u003e uses a resonance-optimised chassis paired with a decoupled belt-drive motor to deliver quiet analogue playback across domestic audio systems. Equipped with the dedicated T-1 radial tonearm and N-1 moving magnet cartridge, this German-engineered deck maintains disciplined mechanical tracking and timing precision. By isolating mechanical vibration at the main bearing assembly, it preserves low-level musical detail without introducing unwanted acoustic coloration.\u003c\/p\u003e\u003ch3\u003eThe Hi-Fi Centre Team Take\u003c\/h3\u003e\u003cp\u003eLiving with the Clearaudio Compass brings disciplined mechanical precision to daily vinyl listening, where physical stability translates directly into effortless musical flow. Its low-friction bearing assembly and decoupled drive system maintain an exceptionally quiet background during quiet listening sessions, allowing subtle harmonic decay to emerge naturally. The factory-aligned T-1 tonearm and N-1 cartridge track demanding vinyl pressings with composed rhythmic control, avoiding the need for frequent mechanical adjustments. It serves as a resolved analogue foundation that keeps your focus squarely on record collections.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResonance-Optimised Chassis:\u003c\/strong\u003e Neutralises acoustic feedback and chassis vibrations to safeguard precise rhythmic timing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision T-1 Tonearm:\u003c\/strong\u003e Provides rigid, low-friction radial tracking for consistent groove contact across diverse pressings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Fitted N-1 Cartridge:\u003c\/strong\u003e Delivers balanced moving magnet playback with accurate channel separation and linear frequency extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized Dealer Support:\u003c\/strong\u003e Guarantees authentic manufacturer warranty coverage alongside dedicated technical assistance from Hi-Fi Centre.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \u0026amp; Model:\u003c\/strong\u003e Clearaudio Compass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Belt-drive analogue turntable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm:\u003c\/strong\u003e Clearaudio T-1 radial tonearm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e Clearaudio N-1 moving magnet (MM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive System:\u003c\/strong\u003e Decoupled DC motor with precision ground flat belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing:\u003c\/strong\u003e Polished hardened steel bearing in a sintered bronze bushing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishes:\u003c\/strong\u003e Black, Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Accessories:\u003c\/strong\u003e Hinged dust cover, Clearaudio T-1 tonearm, Clearaudio N-1 cartridge\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the Clearaudio Compass require a phono preamplifier?\u003c\/strong\u003e\u003cbr\u003eYes. Fitted with the Clearaudio N-1 moving magnet cartridge, it outputs a phono-level signal that requires an integrated MM phono input or a dedicated external phono stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the tonearm and cartridge pre-aligned from the factory?\u003c\/strong\u003e\u003cbr\u003eYes. The T-1 tonearm and N-1 cartridge come factory-installed and aligned, requiring only basic initial setup, including belt installation and counterweight adjustment, prior to playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan the cartridge be upgraded in the future?\u003c\/strong\u003e\u003cbr\u003eYes. The T-1 radial tonearm features standard half-inch cartridge mounting, offering full compatibility with upgraded moving magnet or moving coil cartridges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs a dust cover included with the Clearaudio Compass?\u003c\/strong\u003e\u003cbr\u003eYes. A hinged dust cover is supplied in the box to protect the platter, tonearm, and bearing assembly from airborne dust.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Clearaudio","offers":[{"title":"Black","offer_id":44890128252981,"sku":"Compass-Black","price":1695.0,"currency_code":"CAD","in_stock":true},{"title":"Silver","offer_id":44890128285749,"sku":"Compass-Silver","price":1695.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/Compass_Silver.jpg?v=1767117861"},{"product_id":"clearaudio-innovation-reference-turntable","title":"Clearaudio Innovation Reference Turntable (Store Demo, 12\" Tonearm)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eClearaudio's Innovation\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e is a German-engineered \u003cb\u003ereference-level turntable\u003c\/b\u003e built for serious analogue listeners who want a genuine foundation for a high-end vinyl system. This particular unit is a store demo in excellent condition, fitted with Clearaudio's \u003cb\u003e12-inch Universal tonearm\u003c\/b\u003e rather than the standard 9-inch. No cartridge is included, but our team can fit and align any cartridge from our extensive catalog to complete the system to your taste.\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"the_hi_fi_centre_team_take\"\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eThe Hi-Fi Centre Team Take\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003cspan lang=\"EN-US\"\u003eThis is a turntable built for decades of serious listening, not just another spinning record player. The Innovation's high-mass chassis and near-frictionless Ceramic Magnetic Bearing let the mechanics disappear into the background, so all you hear is the music - deep, controlled bass, a stable stereo image, and none of the mechanical noise that creeps into lighter decks. The longer 12-inch tonearm on this unit adds a further step up in tracking accuracy across the whole side of a record. It rewards patience during setup and repays it many times over once a well-matched cartridge is dialed in. For anyone building a system meant to last a generation, this is the kind of turntable you buy once.\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"key_acoustic_design_features\"\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eKey Acoustic \u0026amp; Design Features\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eCeramic Magnetic Bearing:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e Clearaudio's patented CMB partially levitates the platter on opposing magnetic fields, virtually eliminating friction and mechanical noise.\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eHigh-Mass Isolation Chassis:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e A substantial, multi-layer chassis isolates the platter and tonearm from external vibration for a quieter, more stable soundstage.\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003e12-Inch Universal Tonearm:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e This demo unit's longer carbon-fiber tonearm reduces tracking distortion across the record compared to the standard 9-inch arm.\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"technical_specifications\"\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eTechnical Specifications\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eBrand:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e Clearaudio\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eModel:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e Innovation\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eType:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e Precision-engineered analogue turntable\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eBearing:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e Clearaudio Ceramic Magnetic Bearing (CMB)\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eMotor \/ Speed Control:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e High-torque, decoupled DC motor with infrared-sensor optical speed control (OSC)\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eSpeeds:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e 33 ⅓, 45, 78 RPM\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eSpeed Accuracy:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e Less than ±0.05% (measured)\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003ePlatter:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e 70mm high-density synthetic main platter on a 15mm stainless-steel sub-platter\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eTonearm (this unit):\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e Clearaudio Universal 12\" tonearm, carbon-fiber tube, effective length 308mm\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eCartridge:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e Not included; compatible with a wide range of MM\/MC cartridges - Hi-Fi Centre can fit and align a cartridge from our catalog\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eDimensions (W x D x H):\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e Approx. 460 x 485 x 220mm (with tonearm base, excluding tonearm)\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eWeight:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e Approx. 24kg (chassis only, excludes tonearm and power supply)\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003ePower Consumption:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e Max 9.3W \/ 2.5W in operation \/ 2.5W standby\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eCondition:\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e Store demo unit, excellent condition\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"frequently_asked_questions\"\u003e\u003c\/a\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eWhat is the advantage of the 12-inch tonearm over the standard 9-inch version?\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e\u003cbr\u003eThe longer 12-inch tonearm provides a shallower tracking arc across the record surface, significantly reducing angular tracking error and distortion—particularly on challenging inner grooves—for cleaner, more precise playback.\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eDoes this turntable come supplied with a cartridge?\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e\u003cbr\u003eNo cartridge is included with this unit. However, our specialist team can supply, mount, and precision-align any moving magnet (MM) or moving coil (MC) cartridge from our catalogue to match your exact system requirements.\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eHow does the Ceramic Magnetic Bearing (CMB) improve audio performance?\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e\u003cbr\u003eClearaudio's patented CMB technology suspends the platter using opposing magnetic fields, virtually eliminating mechanical contact and bearing friction. This prevents motor and bearing noise from transferring into the audio signal, resulting in an exceptionally quiet background.\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan lang=\"EN-US\"\u003eCan this turntable play 78 RPM shellac records?\u003c\/span\u003e\u003c\/b\u003e\u003cspan lang=\"EN-US\"\u003e\u003cbr\u003eYes, the Innovation features electronic speed selection for 33 ⅓, 45, and 78 RPM, monitored continuously by an Optical Speed Control (OSC) system to maintain pitch stability across all three formats.\u003c\/span\u003e\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":44890719944757,"sku":"Innovation-SW","price":19995.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/Innovation.jpg?v=1767134753"},{"product_id":"naim-nap250dr-pre-owned","title":"Naim NAP250DR (Pre-Owned)","description":"\u003ch3 data-section-id=\"1m5wue9\" data-start=\"79\" data-end=\"133\"\u003eElevate Your System to True High-End Performance\u003c\/h3\u003e\n\u003cp data-start=\"134\" data-end=\"440\"\u003eFor nearly five decades, the NAP 250 has defined what a reference power amplifier should be—and the DR (Discrete Regulator) version takes that legacy to a new level. Designed and engineered in Salisbury, England, the NAP 250 DR delivers the authority, control, and musicality demanded by serious listeners.\u003c\/p\u003e\n\u003cp data-start=\"442\" data-end=\"748\"\u003eThis is not just about power—it’s about unlocking the full potential of your speakers. With refined regulation technology and a meticulously engineered power supply, the NAP 250 DR ensures a cleaner signal path, lower noise, and a more lifelike listening experience. \u003cspan class=\"\" data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003chr data-start=\"750\" data-end=\"753\"\u003e\n\u003ch3 data-section-id=\"1iz91iu\" data-start=\"755\" data-end=\"771\"\u003eKey Features\u003c\/h3\u003e\n\u003cp data-start=\"773\" data-end=\"961\"\u003e\u003cstrong data-start=\"773\" data-end=\"811\"\u003eDiscrete Regulator (DR) Technology\u003c\/strong\u003e\u003cbr data-start=\"811\" data-end=\"814\"\u003eNaim’s DR power supply design provides ultra-stable, low-noise power delivery—resulting in greater transparency, tighter bass, and improved timing.\u003c\/p\u003e\n\u003cp data-start=\"963\" data-end=\"1164\"\u003e\u003cstrong data-start=\"963\" data-end=\"991\"\u003e80W of Pure Control (8Ω)\u003c\/strong\u003e\u003cbr data-start=\"991\" data-end=\"994\"\u003eDelivers authoritative power with exceptional headroom, ensuring effortless dynamics and zero strain—even with demanding speakers. \u003cspan class=\"\" data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"1166\" data-end=\"1368\"\u003e\u003cstrong data-start=\"1166\" data-end=\"1193\"\u003eIconic Naim Engineering\u003c\/strong\u003e\u003cbr data-start=\"1193\" data-end=\"1196\"\u003eA circuit philosophy refined since 1975, combining simplicity with precision for consistent, musical performance across generations. \u003cspan class=\"\" data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"1370\" data-end=\"1523\"\u003e\u003cstrong data-start=\"1370\" data-end=\"1403\"\u003eHigh-Current Drive Capability\u003c\/strong\u003e\u003cbr data-start=\"1403\" data-end=\"1406\"\u003eDesigned to maintain grip and control across a wide range of loudspeakers, revealing detail and nuance at any volume.\u003c\/p\u003e\n\u003cp data-start=\"1525\" data-end=\"1657\"\u003e\u003cstrong data-start=\"1525\" data-end=\"1560\"\u003eLow-Resonance Aluminium Chassis\u003c\/strong\u003e\u003cbr data-start=\"1560\" data-end=\"1563\"\u003eRigid, acoustically optimized construction minimizes vibration and preserves signal integrity.\u003c\/p\u003e\n\u003chr data-start=\"1659\" data-end=\"1662\"\u003e\n\u003ch3 data-section-id=\"c1m0p9\" data-start=\"1664\" data-end=\"1690\"\u003eSound That Moves You\u003c\/h3\u003e\n\u003cp data-start=\"1691\" data-end=\"2006\"\u003eThe NAP 250 DR is known for its unmistakable Naim signature: fast, rhythmic, and deeply engaging. It doesn’t just play music—it brings energy, texture, and emotion to every performance. Expect tighter bass, more open midrange, and a soundstage that feels alive and immersive. \u003cspan class=\"\" data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the standard NAP 250 and the NAP 250 DR?\u003c\/strong\u003e\u003cbr\u003eThe DR edition incorporates Naim’s Discrete Regulator technology alongside bespoke NA009 output transistors, originally developed for the flagship Statement amplifier. This architecture provides an ultra-low noise floor, faster transient recovery, and enhanced musical control under demanding loudspeaker loads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the NAP 250 DR supply power to a preamplifier?\u003c\/strong\u003e\u003cbr\u003eNo. Unlike lower-powered models such as the NAP 200, the NAP 250 DR is dedicated purely to power amplification and does not contain auxiliary power feeds. Any connected analogue preamplifier (such as a NAC 282 or NAC 252) will require its own independent power supply, such as a HiCap DR or SuperCap DR.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speaker cables are recommended for the NAP 250 DR?\u003c\/strong\u003e\u003cbr\u003eClassic Naim power amplifiers rely on the loudspeaker cable to provide essential output inductance. For optimum performance, stability, and sound quality, a minimum run of 3.5 metres per channel of dedicated low-capacitance, moderately high-inductance cable (such as Naim NAC A5) terminated with 4mm banana plugs is recommended.\u003c\/p\u003e","brand":"Pre-Owned\/Demo","offers":[{"title":"Default Title","offer_id":45095624278069,"sku":null,"price":3999.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/NaimNAP250DR.jpg?v=1775599279"},{"product_id":"burmester-101-classic-line-integrated-amplifier-copy","title":"Burmester 101 Classic Line Integrated Amplifier (Demo)","description":"\u003cp\u003eThe Burmester 101 Classic Line Integrated Amplifier anchors high-performance stereo systems through an advanced interface architecture comprising three balanced XLR inputs, two single-ended RCA inputs, and a dedicated pre-amplifier output. Engineered for discerning listeners seeking acoustic purity and authoritative speaker control, it combines an analogue power supply with high-efficiency output stages to deliver 120 watts per channel into 4 ohms. A fully DC-coupled signal pathway eliminates distorting capacitors, preserving complete transparency and low background noise across all connected analogue sources.\u003c\/p\u003e\u003ch3\u003eThe Hi-Fi Centre Team Take\u003c\/h3\u003e\u003cp\u003eLiving with the Burmester 101 reveals an integrated amplifier that balances effortless authority with remarkable finesse during everyday listening. The tactile action of its machined rotary volume control and polished chrome switches establishes an immediate sense of solid German precision in the home. Engaging the switchable Smooth function transforms quiet late-night listening sessions, enriching low-end presence and subtle acoustic textures without upsetting tonal balance or leaking noise throughout the house. It functions as an enduring system hub, delivering expansive dynamics during spirited playback and delicate clarity at low volumes.\u003c\/p\u003e\u003ch3\u003eKey Acoustic \u0026amp; Design Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Efficiency Power Delivery:\u003c\/strong\u003e Generates 120 watts per channel into 4 ohms to maintain commanding grip, broad dynamic range, and precise loudspeaker control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable Smooth Function:\u003c\/strong\u003e Enriches bass texture and preserves upper-register presence during quiet, low-level evening listening sessions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC-Coupled Architecture:\u003c\/strong\u003e Completely removes signal-degrading coupling capacitors from the audio pathway to ensure clean, uncoloured acoustic reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorised Dealer Support:\u003c\/strong\u003e Hi-Fi Centre is an Authorized Dealer for Burmester, ensuring full manufacturer warranty protection and qualified technical guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Burmester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 101 Classic Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDevice Type:\u003c\/strong\u003e Integrated amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Output:\u003c\/strong\u003e 120 W per channel into 4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 5 Hz to 60 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Harmonic Distortion (THD+N):\u003c\/strong\u003e 0.015%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping Factor:\u003c\/strong\u003e \u0026gt; 250\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue Inputs:\u003c\/strong\u003e 3 x balanced XLR pairs, 2 x single-ended RCA pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue Outputs:\u003c\/strong\u003e 1 x balanced XLR pre-out pair, 1 x 6.3 mm front-panel headphone jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 482 mm x 93 mm x 350 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the purpose of the Burmester 101’s Smooth function?\u003c\/strong\u003e\u003cbr\u003eThe switchable Smooth function applies an analogue circuit adjustment that gently reinforces bass warmth and rounds off treble edges during low-volume evening sessions, ensuring full-bodied musicality without requiring elevated sound pressure levels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the Burmester 101 be integrated with external power amplifiers or active subwoofers?\u003c\/strong\u003e\u003cbr\u003eYes. It features a dedicated pair of balanced XLR pre-amplifier outputs, enabling seamless connection to separate power amplification stages or powered subwoofers while utilising the unit's high-precision volume control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat advantage does the DC-coupled circuit design provide?\u003c\/strong\u003e\u003cbr\u003eBy completely eliminating signal-path coupling capacitors, the DC-coupled architecture prevents phase shift and low-frequency roll-off, delivering exceptional transient speed, extended bass authority, and neutral tonal accuracy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the status and warranty coverage of this demo unit?\u003c\/strong\u003e\u003cbr\u003eThis ex-demonstration unit has been carefully operated and maintained within our authorised showroom environment. It has undergone full bench testing to confirm optimal mechanical and acoustic performance, and it carries complete manufacturer-backed warranty support.\u003c\/p\u003e","brand":"Burmester","offers":[{"title":"Default Title","offer_id":45249960935477,"sku":"101","price":12999.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/1x1_BUR_Web_101_Front-760x760.png?v=1707692987"},{"product_id":"innuos-phoenixnet-network-switch-copy","title":"Innuos PhoenixNET Network Switch (Demo)","description":"\u003cp\u003eThe Innuos PhoenixNET Network Switch isolates sensitive music servers and digital audio streamers from high-frequency network noise by operating on a dedicated 100Mbps transmission architecture. By bypassing standard commercial multi-gigabit circuitry, this audiophile network switch prevents electrical hash and parasitic interference from propagating upstream into digital-to-analogue converters. Its physical design establishes an ultra-quiet signal pathway that preserves data integrity throughout demanding home audio streaming environments.\u003c\/p\u003e\u003ch3\u003eThe Hi-Fi Centre Team Take\u003c\/h3\u003e\u003cp\u003eStandard commercial networking hardware routinely introduces persistent electronic background noise that obscures subtle micro-dynamics and natural room acoustic cues. Integrating the Innuos PhoenixNET creates a noticeably darker, quieter sonic background, exposing instrumental decays and micro-textural details with spatial clarity. Music gains an organic, relaxed presentation that substantially curbs digital listener fatigue during extended evening listening sessions. It provides an effective foundation for any digital front-end where high musical resolution is paramount.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio-Grade Ethernet Isolation:\u003c\/strong\u003e Employs discrete transformers limited to 100Mbps to suppress high-frequency noise from interconnected network lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision OCXO Master Clock:\u003c\/strong\u003e Synchronises network data transfers using a 3ppb 25MHz oven-controlled crystal oscillator to virtually eliminate timing jitter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Linear Power Supplies:\u003c\/strong\u003e Distributes ripple-free direct current to internal stages via two independent linear regulation stages and Mundorf filtering capacitors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized Dealer Support:\u003c\/strong\u003e Guarantees authentic manufacturer warranty coverage and dedicated aftercare from Hi-Fi Centre as an authorised dealer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComponent Type: Audiophile network switch\u003c\/li\u003e\n\u003cli\u003eNetwork Speed: 100Mbps\u003c\/li\u003e\n\u003cli\u003eMaster Clock: 3ppb 25MHz OCXO (Oven-Controlled Crystal Oscillator)\u003c\/li\u003e\n\u003cli\u003eEthernet Inputs: 1 x RJ45\u003c\/li\u003e\n\u003cli\u003eEthernet Outputs: 3 x RJ45\u003c\/li\u003e\n\u003cli\u003ePower Regulation: Dual internal linear power supplies with Mundorf capacitors\u003c\/li\u003e\n\u003cli\u003ePower Consumption: 3W idle, 7.5W peak\u003c\/li\u003e\n\u003cli\u003eMains Supply: 115V AC \/ 230V AC\u003c\/li\u003e\n\u003cli\u003eChassis Construction: CNC-machined aluminium with anti-vibration damping\u003c\/li\u003e\n\u003cli\u003eFinish: Silver\u003c\/li\u003e\n\u003cli\u003eDimensions (W x D x H): 215 mm x 342 mm x 87 mm (8.5 in x 13.5 in x 3.4 in)\u003c\/li\u003e\n\u003cli\u003eWeight: 5.0 kg (11.0 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy does the Innuos PhoenixNET operate at 100Mbps rather than Gigabit speed?\u003c\/strong\u003e\u003cbr\u003eHigh-resolution audio streaming requires minimal continuous bandwidth compared to video, but standard Gigabit transceivers generate substantial high-frequency electrical noise. Restricting transmission to 100Mbps allows the use of specialised audio-grade isolation transformers that significantly lower the electronic noise floor without compromising streaming stability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow should the PhoenixNET be connected within an audio system?\u003c\/strong\u003e\u003cbr\u003eConnect your home router or primary upstream network switch into the single RJ45 input port, then connect your music server, network transport, or streamer directly to the dedicated RJ45 audio output ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this demo unit include warranty coverage?\u003c\/strong\u003e\u003cbr\u003eYes. As an authorised Innuos dealer, Hi-Fi Centre supplies this ex-demonstration unit fully inspected and bench-tested, accompanied by authentic manufacturer warranty coverage and ongoing technical support.\u003c\/p\u003e","brand":"Innuos","offers":[{"title":"Silver","offer_id":45269159706677,"sku":"PhoenixNET-Silver","price":3999.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/PhoenixNet.jpg?v=1781833922"},{"product_id":"b-w-fs805-d4-speaker-stand-copy","title":"B\u0026W FS805 D4 Speaker Stand (Demo)","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eBowers \u0026amp; Wilkins FS‑805 D4 stands are designed to let the 805 D4 perform at its best. Built specifically for the speaker, they provide the ideal height, rigidity and acoustic isolation so the sound remains clean and controlled. With a stable footprint, hidden cable management and matching finishes, FS‑805 D4 stands integrate the speakers elegantly into your room while preserving their full sonic potential.\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAre the speakers bolted directly to the stands?\u003c\/strong\u003e\u003cbr\u003eYes, the FS-805 D4 stands include dedicated fixing bolts to mechanically secure the Bowers \u0026amp; Wilkins 805 D4 speakers to the top plate, optimising coupling and physical stability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the columns be mass-loaded?\u003c\/strong\u003e\u003cbr\u003eYes, the columns can be filled with inert mass, such as kiln-dried sand or dedicated acoustic stand filler, to increase stability and further reduce cabinet-borne vibrations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat floor fittings are included?\u003c\/strong\u003e\u003cbr\u003eThe stands are supplied with both adjustable carpet spikes and rubber feet to isolate the stands effectively on any surface without damaging hard floors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is meant by ex-demo condition?\u003c\/strong\u003e\u003cbr\u003eAs an ex-demonstration item, these stands have been utilised for display or customer auditioning in a showroom environment. They have been inspected to verify full structural integrity, though minor surface wear or cosmetic blemishes from handling may be present.\u003c\/p\u003e","brand":"Bowers \u0026 Wilkins","offers":[{"title":"Silver","offer_id":45714677661749,"sku":"FS805 D4-Silver","price":699.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/products\/805dd4-stand-front-silver.webp?v=1693026666"},{"product_id":"nad-c658-c298","title":"NAD C658 + C298","description":"\u003cp\u003eThe \u003cstrong\u003eNAD\u003c\/strong\u003e C658 + C298 \u003cstrong\u003estreaming preamplifier and stereo power amplifier system\u003c\/strong\u003e pairs high-resolution BluOS network decoding with Purifi Eigentakt power amplification for accurate two-channel audio reproduction. This preowned package incorporates Dirac Live room correction and Modular Design Construction (MDC) expansion slots to ensure precise acoustic tuning and forward-compatible hardware integration across diverse domestic environments.\u003c\/p\u003e\u003ch3\u003eThe Hi-Fi Centre Team Take\u003c\/h3\u003e\u003cp\u003eOperating the C 658 preamplifier via the BluOS platform delivers swift, responsive access across network storage and lossless streaming libraries. In daily operation, the C 298 power amplifier operates with an exceptionally quiet noise floor, rendering low-level dynamic detail with clarity even at modest volume settings. Implementing the included Dirac Live calibration mitigates low-frequency standing waves in challenging rooms, producing a tight, articulate bass response. The combined system manages source switching, digital conversion, and clean speaker drive without sonic coloration.\u003c\/p\u003e\u003ch3\u003eKey Acoustic \u0026amp; Design Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurifi Eigentakt Amplification:\u003c\/strong\u003e Delivers clean, low-distortion current into demanding loudspeaker loads with negligible harmonic or intermodulation distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirac Live Calibration:\u003c\/strong\u003e Analyses acoustic room reflections to correct frequency response and impulse timing anomalies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluOS Multi-Room Architecture:\u003c\/strong\u003e Enables native 24-bit\/192kHz music streaming, local library indexing, and two-way aptX HD Bluetooth transmission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized Dealer Support:\u003c\/strong\u003e Hi-Fi Centre is an Authorized Dealer, providing verified component inspections, full warranty coverage, and dedicated technical support.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \u0026amp; Model:\u003c\/strong\u003e NAD C 658 \u0026amp; NAD C 298\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Type:\u003c\/strong\u003e BluOS streaming DAC preamplifier and stereo power amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Power Output:\u003c\/strong\u003e 185 W per channel into 8 ohms, 340 W per channel into 4 ohms (stereo); 620 W into 8 ohms (bridged mono)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Processing:\u003c\/strong\u003e ESS Sabre 32-bit DAC, BluOS high-resolution streaming, Dirac Live room correction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue \u0026amp; Digital Inputs:\u003c\/strong\u003e 2 x optical digital, 2 x coaxial digital, 2 x single-ended line RCA, 1 x MM phono, 1 x stereo balanced XLR (C 298), 1 x stereo single-ended RCA (C 298)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 x balanced XLR pre-out, 1 x single-ended RCA pre-out, 2 x mono subwoofer outputs, multi-way speaker binding posts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork \u0026amp; Connectivity:\u003c\/strong\u003e Gigabit Ethernet, dual-band Wi-Fi, two-way aptX HD Bluetooth, USB-A host port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Preowned, like-new condition\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan the C 298 power amplifier be bridged for monoblock operation?\u003c\/strong\u003e\u003cbr\u003eYes. The C 298 includes a bridge mode switch on the rear panel, delivering up to 620 W continuous output into 8 ohms when configured as a dedicated monoblock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this combination support balanced connections?\u003c\/strong\u003e\u003cbr\u003eYes. The C 658 provides stereo balanced XLR pre-amplifier outputs, and the C 298 features balanced XLR inputs to reject common-mode noise and maintain signal purity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is Dirac Live room correction implemented on the C 658?\u003c\/strong\u003e\u003cbr\u003eThe C 658 connects to the Dirac Live calibration software via your local network using the included measurement microphone and USB adapter, tailoring output frequency response and impulse timing directly to your listening environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan the C 658 accommodate future physical inputs?\u003c\/strong\u003e\u003cbr\u003eYes. The C 658 is engineered with two Modular Design Construction (MDC) slots, allowing future hardware expansion modules—such as HDMI switching—to be integrated without replacing the unit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hi-Fi Centre","offers":[{"title":"Default Title","offer_id":45862889029685,"sku":null,"price":3499.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/NAD1_c9bcab4d-c894-4dfd-bc9a-880d9e90737a.jpg?v=1785969405"},{"product_id":"marten-parker-quintet-floor-standing-speaker-copy","title":"Marten Parker Quintet Floor Standing Speaker (Demo)","description":"\u003cp\u003eThe Marten Parker Quintet Floor Standing Speaker (Demo) utilises single-wire WBT Nextgen binding posts alongside a multi-diverse crossover architecture to deliver high-resolution audio throughout your living space. Handcrafted in Sweden, this preowned floor standing loudspeaker delivers expansive musical presence, reproducing recordings with lifelike scale, natural tonal balance, and effortless clarity.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eResonance-Free M-Board Cabinet:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eSolid enclosure construction forms the core of pristine acoustic performance. The Parker Quintet employs a 35 mm tapered multi-layered M-board cabinet engineered to dampen unwanted physical vibrations. By keeping internal resonance controlled, the cabinet lets music radiate freely into the room without colouration or mid-bass smear.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eCustom Ceramic Drivers and Passive Radiators:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eThe loudspeaker features four 7.5-inch custom ceramic bass and midrange drivers paired with a 1-inch ceramic tweeter. On the rear panel, four 9-inch aluminum passive radiators extend low-end frequencies down to 24 Hz, generating tight, dynamic bass response and open vocal reproduction without introducing port noise.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eJorma Design Cabling and Marten Isolator Feet:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eClean signal conduction inside each enclosure is maintained by handmade Jorma Design copper internal wiring with separate leads for positive and negative paths. Underneath, stainless steel outriggers with custom Marten Isolator feet decouple the cabinet from the room floor, stopping vibrational energy transfer and keeping bass definition crisp.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eAuthorized Dealer:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eWe are an authorized dealer for Marten. Purchasing from a trusted brand partner ensures complete confidence in your purchase, accompanied by full manufacturer's warranty coverage that protects your long-term acoustic enjoyment.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eKey Specifications and Features:\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Way Crossover Architecture:\u003c\/strong\u003e Coordinates four ceramic drivers and a dedicated ceramic tweeter for cohesive frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Ceramic Drivers:\u003c\/strong\u003e Deliver clean, fast transient speed and natural midrange texture across every musical genre.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuad Aluminum Passive Radiators:\u003c\/strong\u003e Reinforce deep, impact-rich low frequencies down to 24 Hz without cabinet turbulence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 mm M-Board Enclosure:\u003c\/strong\u003e Suppresses structural resonance to ensure pure acoustic output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJorma Design Internal Cabling:\u003c\/strong\u003e Preserves raw audio detail and tonal purity throughout the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarten Isolators:\u003c\/strong\u003e Resists floor vibrations to maintain focused stereo imaging and dynamic clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Sensitivity Rating (93 dB):\u003c\/strong\u003e Works efficiently with a broad spectrum of high-grade power amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 24–40,000 Hz ±2 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Rating:\u003c\/strong\u003e 350 W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Impedance:\u003c\/strong\u003e 4 ohms (2.7 ohms minimum).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 24–33 x 117 x 54 cm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 60 kg each.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does demo condition signify for this loudspeaker?\u003c\/strong\u003e\u003cbr\u003eThis ex-demonstration floor standing speaker has been curated in a controlled showroom setting. It has undergone comprehensive testing to ensure complete acoustic and physical integrity, backed by full authorised warranty coverage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat amplifier specifications are recommended for the Parker Quintet?\u003c\/strong\u003e\u003cbr\u003eWith high sensitivity (93 dB) and a 4-ohm nominal impedance dropping to a minimum of 2.7 ohms, the Parker Quintet performs at its best when paired with high-current, stable solid-state or potent valve amplification capable of driving lower impedance loads effortlessly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far from the rear wall should these speakers be positioned?\u003c\/strong\u003e\u003cbr\u003eBecause the cabinet incorporates four rear-firing passive radiators, positioning the speakers at least 0.8 to 1.2 metres away from rear boundaries delivers optimal bass control and an expansive soundstage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the standard ceramic tweeter be upgraded?\u003c\/strong\u003e\u003cbr\u003eYes, the Marten Parker series is engineered with an upgrade pathway, allowing owners to upgrade to Marten's Diamond Edition tweeter assembly.\u003c\/p\u003e","brand":"Marten","offers":[{"title":"Piano Walnut","offer_id":45871803826229,"sku":"Parker Quintet-Piano Walnut","price":19995.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/Marten_Parker_Quintet_-_Piano_Walnut.jpg?v=1748305907"},{"product_id":"eversolo-play-streaming-amplifier-copy","title":"Eversolo Play Streaming Amplifier (Demo)","description":"\u003cp\u003eThe \u003cstrong\u003eEversolo\u003c\/strong\u003e Play Streaming Amplifier integrates a 5.5-inch colour touchscreen display and high-resolution network streaming into a compact \u003cstrong\u003eintegrated amplifier with DAC\u003c\/strong\u003e designed for modern stereo loudspeaker setups. Driven by an AKM AK4493SEQ digital-to-analogue converter and an energy-efficient Class D output stage, it handles native DSD512 and 32-bit\/768kHz PCM files while driving both standmount and floorstanding speakers directly. Its comprehensive architecture accommodates local streaming, HDMI eARC television audio, and analogue sources without requiring auxiliary black boxes.\u003c\/p\u003e\u003ch3\u003eThe Hi-Fi Centre Team Take\u003c\/h3\u003e\u003cp\u003eLiving with the Eversolo Play means complete tactile command over your entire music library straight from the front panel, eliminating the constant reliance on a smartphone. The responsive glass interface displays vibrant album art while the aluminium dial gives instant, reassuring physical control over volume levels. It creates an uncluttered, high-performance listening zone that transitions seamlessly from ambient daytime playlists to focused evening sessions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Touchscreen Navigation:\u003c\/strong\u003e Full-colour 5.5-inch display facilitates immediate track browsing, input switching, and album artwork viewing without opening an external app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision AKM Decoding:\u003c\/strong\u003e Onboard AK4493SEQ DAC architecture accurately renders studio-grade PCM and DSD audio streams with low harmonic distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Current Output:\u003c\/strong\u003e Efficient Class D amplification provides clean power across 8-ohm and 4-ohm speaker loads for controlled dynamic transients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized Dealer Support:\u003c\/strong\u003e Hi-Fi Centre is an Authorized Dealer, ensuring full manufacturer warranty coverage, certified hardware provenance, and ongoing specialist guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \u0026amp; Model:\u003c\/strong\u003e Eversolo Play Streaming Amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier Topology:\u003c\/strong\u003e Class D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Power Output:\u003c\/strong\u003e 60W RMS into 8Ω \/ 110W RMS into 4Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDAC Architecture:\u003c\/strong\u003e AKM AK4493SEQ (up to 32-bit \/ 768kHz PCM, native DSD512)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 5.5-inch colour LCD touchscreen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20Hz – 20kHz (±0.2dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio (SNR):\u003c\/strong\u003e \u0026gt;109dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Harmonic Distortion (THD+N):\u003c\/strong\u003e \u0026lt;0.0037% @ 1kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Inputs:\u003c\/strong\u003e 1x HDMI eARC, 1x Optical Toslink, 1x Coaxial, 1x USB Audio\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue Inputs:\u003c\/strong\u003e 1x Stereo RCA (selectable Line \/ Phono MM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Outputs:\u003c\/strong\u003e Gold-plated 5-way binding posts, 1x Mono RCA Subwoofer Out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork \u0026amp; Connectivity:\u003c\/strong\u003e Wi-Fi, Ethernet RJ45, Bluetooth 5.3, Apple AirPlay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreaming Protocols:\u003c\/strong\u003e Roon Ready, TIDAL Connect, Qobuz Connect, UPnP \/ DLNA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis:\u003c\/strong\u003e CNC-machined aluminium alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x D x H):\u003c\/strong\u003e 230 mm x 230 mm x 75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.9 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I connect my television directly to the Eversolo Play?\u003c\/strong\u003e\u003cbr\u003eYes. The unit incorporates a dedicated HDMI eARC port, enabling straightforward integration with an eARC\/ARC-compatible television for uncompressed stereo audio and volume synchronisation via your television remote control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Eversolo Play require a separate power amplifier?\u003c\/strong\u003e\u003cbr\u003eNo. The Eversolo Play is an integrated streaming amplifier featuring an internal Class D amplification stage, designed to drive passive standmount or floorstanding loudspeakers directly without supplementary amplification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I connect a turntable to this amplifier?\u003c\/strong\u003e\u003cbr\u003eYes. The analogue stereo RCA input includes a switchable moving magnet (MM) phono preamplifier, permitting direct connection of turntables fitted with an MM cartridge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does 'Demo' condition mean for this unit?\u003c\/strong\u003e\u003cbr\u003eThis demo unit has been carefully demonstrated within a controlled showroom environment. It has undergone comprehensive testing to ensure flawless acoustic and mechanical operation and is backed by complete manufacturer warranty coverage from an authorised dealer.\u003c\/p\u003e","brand":"Eversolo","offers":[{"title":"Default Title","offer_id":45882477084725,"sku":"Play","price":799.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/Eversolo1.jpg?v=1748553895"},{"product_id":"jl-audio-e-sub-e110-10-subwoofer-copy","title":"JL Audio E-Sub E110 10” Subwoofer (Open Box)","description":"\u003cp\u003eThe \u003cstrong\u003eJL Audio\u003c\/strong\u003e E-Sub E110 10” \u003cstrong\u003esubwoofer\u003c\/strong\u003e integrates a compact sealed acoustic suspension enclosure and an aluminium-braced structure to deliver controlled low-frequency reproduction for critical stereo listening and multi-channel home theatre setups. Powered by an internal 1200-watt switching amplifier, this active system delivers immediate dynamic output while strictly curbing mechanical distortion. The reduced cabinet footprint allows versatile placement within smaller listening environments without surrendering sub-bass reach.\u003c\/p\u003e\u003ch3\u003eThe Hi-Fi Centre Team Take\u003c\/h3\u003e\u003cp\u003eIn real-world domestic listening, the JL Audio E-Sub E110 delivers a fast, articulate bass foundation that blends seamlessly into the listening space. Its sealed acoustic suspension alignment ensures that complex acoustic basslines, low percussion, and transient film effects remain distinct rather than boomy or ungrounded. Even during late-night playback at lower volumes, the cabinet maintains full dynamic presence and tactile weight without shaking partition walls. It represents a practical, high-performance solution for listeners requiring genuine low-end authority within a space-conscious profile.\u003c\/p\u003e\u003ch3\u003eKey Acoustic \u0026amp; Design Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDMA-Optimised Driver:\u003c\/strong\u003e Regulates linear cone excursion to suppress mechanical distortion during demanding low-frequency transients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1200-Watt Switching Amplifier:\u003c\/strong\u003e Delivers instantaneous power reserves to control deep bass passages cleanly without thermal or acoustic compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Aluminium Baffle:\u003c\/strong\u003e Structurally reinforces the front cabinet to eradicate parasitic vibrations and unwanted enclosure colouration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorised Dealer Coverage:\u003c\/strong\u003e Hi-Fi Centre is an authorised dealer for JL Audio, providing authentic factory warranty protection and dedicated product support.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \u0026amp; Model:\u003c\/strong\u003e JL Audio E-Sub E110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Type:\u003c\/strong\u003e Sealed acoustic suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver Complement:\u003c\/strong\u003e 10-inch (250 mm) long-throw woofer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 25 Hz – 116 Hz (±1.5 dB), -3 dB at 23 Hz \/ 120 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier Power:\u003c\/strong\u003e 1200 W RMS short-term\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Processing:\u003c\/strong\u003e Active two-way crossover with dedicated line-level high-pass outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs \u0026amp; Outputs:\u003c\/strong\u003e Stereo RCA line inputs, speaker-level inputs, stereo RCA line outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishes:\u003c\/strong\u003e Black Ash, Black Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 362 mm x 343 mm x 419 mm (14.24 in x 13.5 in x 16.51 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.9 kg (52.7 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan the JL Audio E-Sub E110 be integrated into a traditional two-channel stereo system?\u003c\/strong\u003e\u003cbr\u003eYes. The E110 features both line-level RCA and speaker-level inputs, as well as an active two-way crossover with dedicated high-pass RCA outputs, allowing straightforward integration with stereo preamplifiers or integrated amplifiers without onboard bass management.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the sonic advantages of its sealed acoustic suspension design?\u003c\/strong\u003e\u003cbr\u003eA sealed alignment delivers low group delay, superior transient speed, and gradual low-frequency roll-off. This results in tighter, more musical bass definition that blends cohesively with main loudspeakers and avoids acoustic overhang in domestic rooms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the purpose of JL Audio’s DMA-optimised driver?\u003c\/strong\u003e\u003cbr\u003eDynamic Motor Analysis (DMA) is JL Audio’s proprietary finite element analysis system. It optimises motor behaviour under high power and long excursion, maintaining linear electromagnetic force to significantly minimise distortion across heavy dynamic swings.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Black Ash","offer_id":67770371964981,"sku":"E110-Ash","price":2199.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/e110-GLOSS-FLT.jpg?v=1698102481"},{"product_id":"estelon-aura-floor-standing-speaker-demo","title":"Estelon Aura Floor Standing Speaker (Demo)","description":"\u003cp\u003eThe Estelon Aura Floor Standing Speaker is a three-way, sealed-enclosure \u003cstrong\u003efloor standing speaker\u003c\/strong\u003e engineered with a 250 mm downward-firing bass driver for audiophiles demanding authentic acoustic reproduction in modern living environments. Built by \u003cstrong\u003eEstelon\u003c\/strong\u003e from a thermoformed mineral-filled composite, the curved cabinet incorporates zero parallel internal walls to prevent structural resonance and acoustic colouration. Symmetrical driver placement around a dedicated waveguide ensures wide, uniform high-frequency dispersion and stable stereo imaging across the entire listening space.\u003c\/p\u003e\u003ch3\u003eThe Hi-Fi Centre Team Take\u003c\/h3\u003e\u003cp\u003eLiving with the Aura transforms regular domestic living spaces into an open, expansive soundstage without demanding strict placement far into the room. Its sealed acoustic suspension and floor-coupled bass design deliver clean, articulate low-frequency energy that remains tightly controlled across various flooring materials. The presentation remains remarkably natural and unforced, allowing for fatigue-free listening across extended evening sessions. It achieves an ideal balance between sculptural contemporary industrial design and uncompromising acoustic integrity.\u003c\/p\u003e\u003ch3\u003eKey Acoustic \u0026amp; Design Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermoformed Composite Enclosure:\u003c\/strong\u003e Curved geometry with non-parallel internal surfaces eliminates internal standing waves and prevents cabinet vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEgyptian Papyrus Midrange:\u003c\/strong\u003e Dual 130 mm drivers deliver rapid transient response and transparent, uncoloured vocal reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Base Loading:\u003c\/strong\u003e Downward-firing 250 mm driver couples directly with the floor to produce deep, evenly distributed bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized Dealer Support:\u003c\/strong\u003e Hi-Fi Centre is an authorized dealer, providing full manufacturer warranty coverage and dedicated audio specialist guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoudspeaker Type:\u003c\/strong\u003e 3-way passive floor standing loudspeaker, sealed enclosure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Frequency Driver:\u003c\/strong\u003e 1 x 26 mm (1 in) Scan-Speak Illuminator textile dome with waveguide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMidrange Drivers:\u003c\/strong\u003e 2 x 130 mm (5 in) Satori Egyptian papyrus cone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Frequency Driver:\u003c\/strong\u003e 1 x 250 mm (10 in) Faital semi-pressed paper cone (downward-firing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 35 Hz – 25,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Rating:\u003c\/strong\u003e 150 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 90 dB \/ 2.83 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Impedance:\u003c\/strong\u003e 4 ohms (minimum 2 ohms at 58 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimal Amplifier Power:\u003c\/strong\u003e 30 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 1366 mm x 384 mm x 367 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 34 kg each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Finishes:\u003c\/strong\u003e White, Black Gloss, Starlight, Iron Grey, Horizon Blue, Amber Elegance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat type of amplifier is best suited for the Estelon Aura?\u003c\/strong\u003e\u003cbr\u003eWhile the minimum recommended amplifier power is 30 W, the Aura’s nominal impedance dips to 2 ohms at 58 Hz. We recommend pairing it with a stable, high-current amplifier capable of delivering clean power into low-impedance loads to fully realise its dynamic range and bass control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow forgiving is the Estelon Aura regarding room placement?\u003c\/strong\u003e\u003cbr\u003eThe Aura is exceptionally versatile in domestic settings. Its sealed enclosure and downward-firing woofer design couple directly with the floor rather than relying on rear bass ports, allowing for cleaner room integration and closer placement to rear boundaries without introducing bass boom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the benefit of the thermoformed composite cabinet?\u003c\/strong\u003e\u003cbr\u003eThe proprietary mineral-filled composite material allows for complex, organic curves with zero parallel internal walls. This structural rigidity suppresses acoustic resonances and completely prevents internal standing waves, ensuring pure, uncoloured sound reproduction.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Estelon","offers":[{"title":"White","offer_id":67781232427061,"sku":"Aura-White","price":12500.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/9355\/files\/EstelonAuraWhite.jpg?v=1706037726"}],"url":"https:\/\/hificentre.com\/collections\/pre-owned-demo\/estelon.oembed","provider":"Hi-Fi Centre","version":"1.0","type":"link"}